alisterchapman Posted November 23, 2022 Share Posted November 23, 2022 Here's a quick little tip. When using the CineEI mode on the FX6 or FX9 and monitoring via a LUT a quick way to look at highlights and shadows is via the L/M/H gain switch. Put your chosen shooting EI in the M position then have the lowest EI in the L position and highest in the H position. Shoot with the switch in M. Want to see the highlight range - switch to L, the LUT is darkened allowing you to see what is going on in the highlights. Want to see the shadow range- switch to H, the LUT becomes brighter allowing you to see the shadow range. Just remember to go back to M when you shoot. The FS7/F5/F55/Venice have a function called Hi/Low Key which does something very similar allowing you to step through normal range, highlight range, shadow range. 2 Link to comment Share on other sites More sharing options...
IamOakley Posted November 28, 2022 Share Posted November 28, 2022 Do you know if there is a way to do this on the FX3? Would love to be able to toggle between like that. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now